STRUCTURAL FLOOR SLAB WITH MECHANICAL CONNECTION

Are you looking for a specific solution?

COLLABORATING INSOLE WITH MECHANICAL CONNECTOR

Compared to traditional interventions, the solution Olympus FLOOR It is characterised by the use of innovative, lightweight materials that are compatible with the existing construction, through an intervention on the extrados that involves the creation of a collaborative slab. Through the systems Olympus FLOOR It is possible to work on all types of floors thanks to specific connectors that adapt to any type of load-bearing structure, ensuring the system's functionality. Various types of fiberglass mesh are also used. Oly Mesh Glass which are characterised by high mechanical performance, extreme lightness and manoeuvrability on site, absence of oxidation phenomena and therefore high durability over time. All connectors Oly Connect FLOOR They are available in two heights, allowing the creation of even very thin slabs, thus minimising the thickness of the intervention and therefore reducing the weight of the consolidation intervention.

Extrados reinforcement on a concrete slab_MECHANICAL CONNECTOR

Application of OLY CONNECT FLOOR CA CE marked via ETA by making a pre-hole with a 14mm diameter tip up to the maximum depth and fixing the connector using an impact screwdriver until the smooth part of the stem is completely inserted Apply the OLY MESH GLASS 132x132 / OLY REBAR MESH 150x150 mesh, taking care to overlap adjacent strips by at least 15 cm. The mesh must be tied to the connectors using wires so that it remains raised during pouring, or by providing suitable spacers. Perimeter connection with OLY CHAIN when it is necessary to structurally connect the slab to the perimeter walls Casting of the slab with OLY GROUT CLS 1600 lightweight concrete